Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.

Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.

Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.

Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.

Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.

The most important Smartvest App features:
- Plug & Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC19x00, TVAC16000, PPIC3xxx0, PPIC4x520, PPIC9xxx0)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function

Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish

Supported Products:
FUAA35000A

Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.

>> If the firmwareupdate was not processed correctly and the gateway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.<<
>>Upon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!<<

Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.

Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.

Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.

Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.

Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.

The most important Smartvest App features:
- Plug & Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC19x00, TVAC16000, PPIC3xxx0, PPIC4x520, PPIC9xxx0)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function

Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish

Supported Products:
FUAA35000A

Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.

>> If the firmwareupdate was not processed correctly and the gateway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.<<
>>Upon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!<<

Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.

Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.

Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.

Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.

Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.

The most important Smartvest App features:
- Plug & Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC19x00, TVAC16000, PPIC3xxx0, PPIC4x520, PPIC9xxx0)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function

Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish

Supported Products:
FUAA35000A

Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.

>> If the firmwareupdate was not processed correctly and the gateway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.<<
>>Upon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!<<

Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.

Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.

Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.

Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.

Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.

The most important Smartvest App features:
- Plug & Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC19x00, TVAC16000, PPIC3xxx0, PPIC4x520, PPIC90x00)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function

Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish

Supported Products:
FUAA35000A

Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.

>> If the firmwareupdate was not processed correctly and the gateway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.<<
>>Upon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!<<

Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.
Live access via app any time and any place
Using the Plug \u0026 Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.
Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.
Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.
Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.
The most important Smartvest App features:
- Plug \u0026 Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC19x00, TVAC16000, PPIC3xxx0, PPIC4x520, PPIC90x00)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function
Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish
Supported Products:
FUAA35000A
Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.
\u003e\u003e If the firmwareupdate was not processed correctly and the gateway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.\u003c\u003c
\u003e\u003eUpon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!\u003c\u003c

Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.
\u003e\u003e If the firmwareupdate was not processed correctly and the gaetway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.\u003c\u003c
\u003e\u003eUpon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!\u003c\u003c
Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.
Live access via app any time and any place
Using the Plug \u0026 Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.
Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.
Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.
Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.
The most important Smartvest App features:
- Plug \u0026 Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC16000, TVAC19000, TVAC19100)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function
Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish
Supported Products:
FUAA35000A

Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.
>> If the firmwareupdate was not processed correctly and the gaetway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.<<
>>Upon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!<<
Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.
Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.
Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.
Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.
Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.
The most important Smartvest App features:
- Plug & Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC16000, TVAC19000, TVAC19100)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function
Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish
Supported Products:
FUAA35000A

Please note: The terms of use are fully visible only in case the font size has been set to “Normal” or “small”. Please check your device-settings.
>> If the firmwareupdate was not processed correctly and the gaetway is shortly not reachable, disconnect the gateway from all power supplies for 60 seconds and restart the update process.<<
>>Upon initial start up, pls. perform an FirmwareUpdate of your Alarm Panel by following the advices in the App!<<
Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.
Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.
Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.
Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.
Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.
The most important Smartvest App features:
- Plug & Play: easy installation and operation
- Up to 32 wireless components can be integrated
- Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC16000, TVAC19000, TVAC19100)
- Activating/deactivating of the Smartvest
- Setup of groups and scenarios
- Live view and playback of recorded video data
- Display of the state overview and event list with up to 1,000 entries
- Notification and e-mail function
Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish
Supported Products:
FUAA35000A