NFC Tools on sovellus, jonka avulla voit lukea, kirjoittaa ja ohjelmoida NFC -tunnisteidesi ja muiden yhteensopivien NFC -sirujen tehtäviä.

Yksinkertaiset ja intuitiiviset NFC -työkalut voivat tallentaa vakiotietoja NFC -tunnisteisiin, jotka ovat yhteensopivia minkä tahansa NFC -laitteen kanssa. Voit esimerkiksi tallentaa helposti yhteystietosi, URL -osoitteen, puhelinnumeron, sosiaalisen profiilisi tai jopa sijainnin.

Mutta sovellus menee pidemmälle ja antaa sinun ohjelmoida tehtäviä NFC -tunnisteillesi automatisoidaksesi työt, jotka olivat kerran tylsää. Kytke Bluetooth päälle, aseta hälytys, säädä äänenvoimakkuutta, jaa WiFi -verkon määritykset ja paljon muuta.

Yksinkertainen liike puhelimellasi NFC -tunnisteen edessä ennen nukkumaanmenoa, ja puhelin siirtyy hiljaisuuteen ja herätys asetetaan seuraavana aamuna kokonaan. Erittäin kätevää, eikö?

Teknisesti taitavimmille ovat saatavilla myös nörtit, esiasetetut muuttujat, olosuhteet ja lisätehtävät, jotta voit luoda monimutkaisempia toimintoja.

Helpota elämääsi yli 200 tehtävän ja lukemattomien yhdistelmien avulla.

Kun siirrät laitteesi NFC -sirun lähelle "Lue" -välilehdellä, näet seuraavat tiedot:
- Valmistaja ja tunnisteen tyyppi (esim. Mifare Ultralight, NTAG215).
- Tunnisteen sarjanumero (esim. 04: 85: c8: 5a: 40: 2b: 80).
- Mitä tekniikoita on saatavilla ja tunnisteen standardi (esim. NFC A, NFC Forum Type 2).
- Tiedot koosta ja muistista.
- Jos tunniste on kirjoitettava tai lukittu.
- Ja viimeisenä mutta ei vähäisimpänä, kaikki tunnisteen sisältämät tiedot (NDEF -tietueet).

"Kirjoita" -välilehdellä voit tallentaa standardoituja tietoja, kuten:
- Yksinkertainen teksti, linkki verkkosivustoon, videoon, sosiaaliseen profiiliin tai sovellukseen.
- Sähköposti, puhelinnumero tai ennalta määritetty tekstiviesti.
- Yhteystiedot tai hätäyhteyshenkilö.
- Osoite tai maantieteellinen sijainti.
- WiFi- tai Bluetooth -kokoonpano.
- Ja enemmän.

Kirjoitustoiminnon avulla voit lisätä niin paljon tietoja kuin haluat, jolloin voit tallentaa suuria määriä tietoja tunnisteeseesi.

Muut ominaisuudet -välilehdessä on muita ominaisuuksia, kuten NFC -tunnisteen kopioiminen, poistaminen ja salasanasuojaus.

Tehtävät, joiden avulla voit automatisoida puhelimesi, ovat Tehtävät -välilehdessä ja luokitellaan.

Tässä on muutamia esimerkkejä käytettävissä olevista toimista:
- Aktivoi, deaktivoi tai vaihda Bluetooth.
- Määritä ääniprofiili hiljaiseksi, värinäksi tai normaaliksi.
- Muuta näytön kirkkautta.
- Aseta äänenvoimakkuuden tasot (kuten hälytyksen, ilmoitusten tai soittoäänen voimakkuus).
- Aseta ajastin tai hälytys.
- Lisää tapahtuma kalenteriisi.
- Käynnistä sovellus tai URL / URI.
- Lähetä tekstiviesti tai soita jollekin.
- Lue ääneen teksti, jossa on teksti puheeksi.
- Määritä WiFi -verkko.
- Ja enemmän.

NFC Tools on testattu seuraavilla NFC -tunnisteilla:
- NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA.
- Ultrakevyt, Ultrakevyt C, Ultrakevyt EV1.
-ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA.
- DESFire EV1, EV2, EV3, LIGHT.
- ST25TV, ST25TA, STLRI2K.
- Ja Mifare Classic, Felica, Topaz, EM4x3x.

Jos sinulla on ongelmia, älä epäröi ottaa meihin yhteyttä, autamme sinua mielellämme.

Huomautuksia:
- Tarvitaan NFC -yhteensopiva laite.
- Tehtävien suorittamiseen tarvitset ilmaisen sovelluksen: NFC -tehtävät.

NFC Tools on sovellus, jonka avulla voit lukea, kirjoittaa ja ohjelmoida NFC -tunnisteidesi ja muiden yhteensopivien NFC -sirujen tehtäviä.

Yksinkertaiset ja intuitiiviset NFC -työkalut voivat tallentaa vakiotietoja NFC -tunnisteisiin, jotka ovat yhteensopivia minkä tahansa NFC -laitteen kanssa. Voit esimerkiksi tallentaa helposti yhteystietosi, URL -osoitteen, puhelinnumeron, sosiaalisen profiilisi tai jopa sijainnin.

Mutta sovellus menee pidemmälle ja antaa sinun ohjelmoida tehtäviä NFC -tunnisteillesi automatisoidaksesi työt, jotka olivat kerran tylsää. Kytke Bluetooth päälle, aseta hälytys, säädä äänenvoimakkuutta, jaa WiFi -verkon määritykset ja paljon muuta.

Yksinkertainen liike puhelimellasi NFC -tunnisteen edessä ennen nukkumaanmenoa, ja puhelin siirtyy hiljaisuuteen ja herätys asetetaan seuraavana aamuna kokonaan. Erittäin kätevää, eikö?

Teknisesti taitavimmille ovat saatavilla myös nörtit, esiasetetut muuttujat, olosuhteet ja lisätehtävät, jotta voit luoda monimutkaisempia toimintoja.

Helpota elämääsi yli 200 tehtävän ja lukemattomien yhdistelmien avulla.

Kun siirrät laitteesi NFC -sirun lähelle "Lue" -välilehdellä, näet seuraavat tiedot:
- Valmistaja ja tunnisteen tyyppi (esim. Mifare Ultralight, NTAG215).
- Tunnisteen sarjanumero (esim. 04: 85: c8: 5a: 40: 2b: 80).
- Mitä tekniikoita on saatavilla ja tunnisteen standardi (esim. NFC A, NFC Forum Type 2).
- Tiedot koosta ja muistista.
- Jos tunniste on kirjoitettava tai lukittu.
- Ja viimeisenä mutta ei vähäisimpänä, kaikki tunnisteen sisältämät tiedot (NDEF -tietueet).

"Kirjoita" -välilehdellä voit tallentaa standardoituja tietoja, kuten:
- Yksinkertainen teksti, linkki verkkosivustoon, videoon, sosiaaliseen profiiliin tai sovellukseen.
- Sähköposti, puhelinnumero tai ennalta määritetty tekstiviesti.
- Yhteystiedot tai hätäyhteyshenkilö.
- Osoite tai maantieteellinen sijainti.
- WiFi- tai Bluetooth -kokoonpano.
- Ja enemmän.

Kirjoitustoiminnon avulla voit lisätä niin paljon tietoja kuin haluat, jolloin voit tallentaa suuria määriä tietoja tunnisteeseesi.

Muut ominaisuudet -välilehdessä on muita ominaisuuksia, kuten NFC -tunnisteen kopioiminen, poistaminen ja salasanasuojaus.

Tehtävät, joiden avulla voit automatisoida puhelimesi, ovat Tehtävät -välilehdessä ja luokitellaan.

Tässä on muutamia esimerkkejä käytettävissä olevista toimista:
- Aktivoi, deaktivoi tai vaihda Bluetooth.
- Määritä ääniprofiili hiljaiseksi, värinäksi tai normaaliksi.
- Muuta näytön kirkkautta.
- Aseta äänenvoimakkuuden tasot (kuten hälytyksen, ilmoitusten tai soittoäänen voimakkuus).
- Aseta ajastin tai hälytys.
- Lisää tapahtuma kalenteriisi.
- Käynnistä sovellus tai URL / URI.
- Lähetä tekstiviesti tai soita jollekin.
- Lue ääneen teksti, jossa on teksti puheeksi.
- Määritä WiFi -verkko.
- Ja enemmän.

NFC Tools on testattu seuraavilla NFC -tunnisteilla:
- NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA.
- Ultrakevyt, Ultrakevyt C, Ultrakevyt EV1.
-ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA.
- DESFire EV1, EV2, EV3, LIGHT.
- ST25TV, ST25TA, STLRI2K.
- Ja Mifare Classic, Felica, Topaz, EM4x3x.

Jos sinulla on ongelmia, älä epäröi ottaa meihin yhteyttä, autamme sinua mielellämme.

Huomautuksia:
- Tarvitaan NFC -yhteensopiva laite.
- Tehtävien suorittamiseen tarvitset ilmaisen sovelluksen: NFC -tehtävät.

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other compatible NFC chips.

Simple and intuitive, NFC Tools can record standard information on your NFC tags which will be compatible with any NFC device. For instance, you can easily store your contact details, an URL, a phone number, your social profile or even a location.

But the app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive. Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and more.

A simple motion with your phone in front of your NFC tag before going to sleep, and your phone will switch to silence and your alarm will be set for the next morning, all by itself. Very convenient, isn't it?

For the most tech-savvy of you, the geeks, preset variables, conditions and advanced tasks are also available so you can create more complex actions.

Make your life easier with more than 200 tasks available and an infinite number of combinations.

Passing your device near an NFC chip on the “Read” tab allows you to see data such as:
- The manufacturer and the type of tag (eg : Mifare Ultralight, NTAG215).
- The serial number of the tag (eg : 04:85:c8:5a:40:2b:80).
- What technologies are available and the standard of the tag (eg: NFC A, NFC Forum Type 2).
- Information about the size and memory.
- If the tag is writable or locked.
- And the last but not least, all the data the tag contains (NDEF records).

The "Write" tab lets you record standardised data such as:
- A simple text, a link to a website, video, social profile or an app.
- An email, a phone number or a predefined text message.
- A contact information or an emergency contact.
- An address or geolocation.
- A WiFi or Bluetooth configuration.
- And more.

The write function allows you to add as much data as you wish, this way you can record large quantities of information on your tag.

Other features are available under the "Other" tab, such as copying, erasing and password protecting your NFC tag.

The tasks allowing you to automate your phone are under the "Tasks" tab and are categorised.

Here are a few examples of the available actions:
- Activate, deactivate or toggle your bluetooth.
- Configure a sound profile to silent, vibrate or normal.
- Change your screen brightness.
- Set volume levels (such as your alarm, notification or ring volumes).
- Set a timer or an alarm.
- Insert an event into your calendar.
- Launch an app or an URL / URI.
- Send a text message or dial someone.
- Read aloud a text with text to speech.
- Configure a WiFi network.
- And more.

NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA.
- Ultralight, Ultralight C, Ultralight EV1.
- ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA.
- DESFire EV1, EV2, EV3, LIGHT.
- ST25TV, ST25TA, STLRI2K.
- And Mifare Classic, Felica, Topaz, EM4x3x.

If you have any problems, don’t hesitate to contact us, we'll be pleased to help you.

Notes:
- An NFC compatible device is required.
- In order to execute tasks, you need the free app: NFC Tasks.

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other compatible NFC chips.

Simple and intuitive, NFC Tools can record standard information on your NFC tags which will be compatible with any NFC device. For instance, you can easily store your contact details, an URL, a phone number, your social profile or even a location.

But the app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive. Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and more.

A simple motion with your phone in front of your NFC tag before going to sleep, and your phone will switch to silence and your alarm will be set for the next morning, all by itself. Very convenient, isn't it?

For the most tech-savvy of you, the geeks, preset variables, conditions and advanced tasks are also available so you can create more complex actions.

Make your life easier with more than 200 tasks available and an infinite number of combinations.

Passing your device near an NFC chip on the “Read” tab allows you to see data such as:
- The manufacturer and the type of tag (eg : Mifare Ultralight, NTAG215).
- The serial number of the tag (eg : 04:85:c8:5a:40:2b:80).
- What technologies are available and the standard of the tag (eg: NFC A, NFC Forum Type 2).
- Information about the size and memory.
- If the tag is writable or locked.
- And the last but not least, all the data the tag contains (NDEF records).

The "Write" tab lets you record standardised data such as:
- A simple text, a link to a website, video, social profile or an app.
- An email, a phone number or a predefined text message.
- A contact information or an emergency contact.
- An address or geolocation.
- A WiFi or Bluetooth configuration.
- And more.

The write function allows you to add as much data as you wish, this way you can record large quantities of information on your tag.

Other features are available under the "Other" tab, such as copying, erasing and password protecting your NFC tag.

The tasks allowing you to automate your phone are under the "Tasks" tab and are categorised.

Here are a few examples of the available actions:
- Activate, deactivate or toggle your bluetooth.
- Configure a sound profile to silent, vibrate or normal.
- Change your screen brightness.
- Set volume levels (such as your alarm, notification or ring volumes).
- Set a timer or an alarm.
- Insert an event into your calendar.
- Launch an app or an URL / URI.
- Send a text message or dial someone.
- Read aloud a text with text to speech.
- Configure a WiFi network.
- And more.

NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA.
- Ultralight, Ultralight C, Ultralight EV1.
- ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA.
- DESFire EV1, EV2, EV3, LIGHT.
- ST25TV, ST25TA, STLRI2K.
- And Mifare Classic, Felica, Topaz, EM4x3x.

If you have any problems, don’t hesitate to contact us, we'll be pleased to help you.

Notes:
- An NFC compatible device is required.
- In order to execute tasks, you need the free app: NFC Tasks.

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other compatible NFC chips.

Simple and intuitive, NFC Tools can record standard information on your NFC tags which will be compatible with any NFC device. For instance, you can easily store your contact details, an URL, a phone number, your social profile or even a location.

But the app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive. Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and more.

A simple motion with your phone in front of your NFC tag before going to sleep, and your phone will switch to silence and your alarm will be set for the next morning, all by itself. Very convenient, isn't it?

For the most tech-savvy of you, the geeks, preset variables, conditions and advanced tasks are also available so you can create more complex actions.

Make your life easier with more than 200 tasks available and an infinite number of combinations.

Passing your device near an NFC chip on the “Read” tab allows you to see data such as:
- The manufacturer and the type of tag (eg : Mifare Ultralight, NTAG215).
- The serial number of the tag (eg : 04:85:c8:5a:40:2b:80).
- What technologies are available and the standard of the tag (eg: NFC A, NFC Forum Type 2).
- Information about the size and memory.
- If the tag is writable or locked.
- And the last but not least, all the data the tag contains (NDEF records).

The "Write" tab lets you record standardised data such as:
- A simple text, a link to a website, video, social profile or an app.
- An email, a phone number or a predefined text message.
- A contact information or an emergency contact.
- An address or geolocation.
- A WiFi or Bluetooth configuration.
- And more.

The write function allows you to add as much data as you wish, this way you can record large quantities of information on your tag.

Other features are available under the "Other" tab, such as copying, erasing and password protecting your NFC tag.

The tasks allowing you to automate your phone are under the "Tasks" tab and are categorised.

Here are a few examples of the available actions:
- Activate, deactivate or toggle your bluetooth.
- Configure a sound profile to silent, vibrate or normal.
- Change your screen brightness.
- Set volume levels (such as your alarm, notification or ring volumes).
- Set a timer or an alarm.
- Insert an event into your calendar.
- Launch an app or an URL / URI.
- Send a text message or dial someone.
- Read aloud a text with text to speech.
- Configure a WiFi network.
- And more.

NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA.
- Ultralight, Ultralight C, Ultralight EV1.
- ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA.
- DESFire EV1, EV2, EV3, LIGHT.
- ST25TV, ST25TA, STLRI2K.
- And Mifare Classic, Felica, Topaz, EM4x3x.

If you have any problems, don’t hesitate to contact us, we'll be pleased to help you.

Notes:
- An NFC compatible device is required.
- In order to execute tasks, you need the free app: NFC Tasks.

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other compatible NFC chips.
Simple and intuitive, NFC Tools can record standard information on your NFC tags which will be compatible with any NFC device. For instance, you can easily store your contact details, an URL, a phone number, your social profile or even a location.
But the app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive. Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and more.
A simple motion with your phone in front of your NFC tag before going to sleep, and your phone will switch to silence and your alarm will be set for the next morning, all by itself. Very convenient, isn\u0027t it?
For the most tech-savvy of you, the geeks, preset variables, conditions and advanced tasks are also available so you can create more complex actions.
Make your life easier with more than 200 tasks available and an infinite number of combinations.
Passing your device near an NFC chip on the “Read” tab allows you to see data such as:
- The manufacturer and the type of tag (eg : Mifare Ultralight, NTAG215).
- The serial number of the tag (eg : 04:85:c8:5a:40:2b:80).
- What technologies are available and the standard of the tag (eg: NFC A, NFC Forum Type 2).
- Information about the size and memory.
- If the tag is writable or locked.
- And the last but not least, all the data the tag contains (NDEF records).
The \"Write\" tab lets you record standardised data such as:
- A simple text, a link to a website, video, social profile or an app.
- An email, a phone number or a predefined text message.
- A contact information or an emergency contact.
- An address or geolocation.
- A WiFi or Bluetooth configuration.
- And more.
The write function allows you to add as much data as you wish, this way you can record large quantities of information on your tag.
Other features are available under the \"Other\" tab, such as copying, erasing and password protecting your NFC tag.
The tasks allowing you to automate your phone are under the \"Tasks\" tab and are categorised.
Here are a few examples of the available actions:
- Activate, deactivate or toggle your bluetooth.
- Configure a sound profile to silent, vibrate or normal.
- Change your screen brightness.
- Set volume levels (such as your alarm, notification or ring volumes).
- Set a timer or an alarm.
- Insert an event into your calendar.
- Launch an app or an URL / URI.
- Send a text message or dial someone.
- Read aloud a text with text to speech.
- Configure a WiFi network.
- And more.
NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA.
- Ultralight, Ultralight C, Ultralight EV1.
- ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA.
- DESFire EV1, EV2, EV3, LIGHT.
- ST25TV, ST25TA, STLRI2K.
- And Mifare Classic, Felica, Topaz, EM4x3x.
If you have any problems, don’t hesitate to contact us, we\u0027ll be pleased to help you.
Notes:
- An NFC compatible device is required.
- In order to execute tasks, you need the free app: NFC Tasks.

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other RFID compatible chips.
All you need to do is get your device close to an NFC chip to read the data on it or execute tasks.
Simple and intuitive, NFC Tools can record standard information on your tags which will be compatible with any NFC device.
For instance, you can store a VCARD to share your contact details easily, open an URL, share a phone number or even a geolocation.
But the NFC Tools app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive.
Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and so much more.
For example, a simple motion with your phone in front of your NFC tag before going to sleep and the WiFi will turn off, the phone will switch to silence and your alarm will be set for the next morning, all by itself.
Quite practical, isn\u0027t it?
For the most tech-savvy of you, the geeks :) preset variables, conditions and root tasks are also available so you can create more complex actions.
Make your life easier with more than 100 tasks available and infinite combinations.
The \"Read\" tab allows you to see data such as:
- the maker of the tag
- the type of tag (ex : Mifare Ultralight, NTAG213)
- the norm of the tag (ex : NFC Forum Type 2)
- the available technology (ex: NFC A)
- its serial number (ex : 04:85:c8:5a:40:2b:80)
- the size of the tag and of the data on it
- if you can write on the tag and if the tag can be locked as read only
- all the data on the tag (NDEF format)
The \"Write\" tab let you record standardised data such as:
- a simple text
- a link to a website, a video, a social profile or an app
- an email
- a contact
- a phone number
- a predefined text message
- an address or geolocation
- a WiFi or Bluetooth configuration
- personalised data.
The write function allows you to add as much data as you wish.
This way you can record large quantities of information on your tag.
Other features are available under the \"Other\" tab,
such as copying, erasing and password protecting your NFC tag.
The tasks allowing you to automate your phone are under the \"Tasks\" tab and are categorised.
Here are a few examples of the available actions:
- activate/deactivate/toggle WiFi, Bluetooth, car mode
- configure a sound profile: silent/vibrate/normal
- change brightness
- set volumes levels (media, alarm, notification, ring volume)
- set a timer
- launch an app
- open an URL/URI
- send a text message or make a call
- read aloud a text with text to speech
- configure a WiFi network
- and much much more!
NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 212, 213, 215, 216
- Topaz 512 (BCM512)
- Ultralight, Ultralight C
- MIFARE Classic 1k, 4k
- FeliCa
If you have any problem please feel free to contact me.
Notes:
- NFC compatible device needed
- App permissions are limited to the use of the NFC
- In order to execute tasks, you need the free app: NFC Tasks

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other RFID compatible chips.
All you need to do is get your device close to an NFC chip to read the data on it or execute tasks.
Simple and intuitive, NFC Tools can record standard information on your tags which will be compatible with any NFC device.
For instance, you can store a VCARD to share your contact details easily, open an URL, share a phone number or even a geolocation.
But the NFC Tools app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive.
Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and so much more.
For example, a simple motion with your phone in front of your NFC tag before going to sleep and the WiFi will turn off, the phone will switch to silence and your alarm will be set for the next morning, all by itself.
Quite practical, isn\u0027t it?
For the most tech-savvy of you, the geeks :) preset variables, conditions and root tasks are also available so you can create more complex actions.
Make your life easier with more than 100 tasks available and infinite combinations.
The \"Read\" tab allows you to see data such as:
- the maker of the tag
- the type of tag (ex : Mifare Ultralight, NTAG213)
- the norm of the tag (ex : NFC Forum Type 2)
- the available technology (ex: NFC A)
- its serial number (ex : 04:85:c8:5a:40:2b:80)
- the size of the tag and of the data on it
- if you can write on the tag and if the tag can be locked as read only
- all the data on the tag (NDEF format)
The \"Write\" tab let you record standardised data such as:
- a simple text
- a link to a website, a video, a social profile or an app
- an email
- a contact
- a phone number
- a predefined text message
- an address or geolocation
- a WiFi or Bluetooth configuration
- personalised data.
The write function allows you to add as much data as you wish.
This way you can record large quantities of information on your tag.
Other features are available under the \"Other\" tab,
such as copying, erasing and password protecting your NFC tag.
The tasks allowing you to automate your phone are under the \"Tasks\" tab and are categorised.
Here are a few examples of the available actions:
- activate/deactivate/toggle WiFi, Bluetooth, car mode
- configure a sound profile: silent/vibrate/normal
- change brightness
- set volumes levels (media, alarm, notification, ring volume)
- set a timer
- launch an app
- open an URL/URI
- send a text message or make a call
- read aloud a text with text to speech
- configure a WiFi network
- and much much more!
NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 212, 213, 215, 216
- Topaz 512 (BCM512)
- Ultralight, Ultralight C
- MIFARE Classic 1k, 4k
- FeliCa
If you have any problem please feel free to contact me.
Notes:
- NFC compatible device needed
- App permissions are limited to the use of the NFC
- In order to execute tasks, you need the free app: NFC Tasks

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other RFID compatible chips.
All you need to do is get your device close to an NFC chip to read the data on it or execute tasks.
Simple and intuitive, NFC Tools can record standard information on your tags which will be compatible with any NFC device.
For instance, you can store a VCARD to share your contact details easily, open an URL, share a phone number or even a geolocation.
But the NFC Tools app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive.
Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and so much more.
For example, a simple motion with your phone in front of your NFC tag before going to sleep and the WiFi will turn off, the phone will switch to silence and your alarm will be set for the next morning, all by itself.
Quite practical, isn\u0027t it?
For the most tech-savvy of you, the geeks :) preset variables, conditions and root tasks are also available so you can create more complex actions.
Make your life easier with more than 100 tasks available and infinite combinations.
The \"Read\" tab allows you to see data such as:
- the maker of the tag
- the type of tag (ex : Mifare Ultralight, NTAG213)
- the norm of the tag (ex : NFC Forum Type 2)
- the available technology (ex: NFC A)
- its serial number (ex : 04:85:c8:5a:40:2b:80)
- the size of the tag and of the data on it
- if you can write on the tag and if the tag can be locked as read only
- all the data on the tag (NDEF format)
The \"Write\" tab let you record standardised data such as:
- a simple text
- a link to a website, a video, a social profile or an app
- an email
- a contact
- a phone number
- a predefined text message
- an address or geolocation
- a WiFi or Bluetooth configuration
- personalised data.
The write function allows you to add as much data as you wish.
This way you can record large quantities of information on your tag.
Other features are available under the \"Other\" tab,
such as copying, erasing and password protecting your NFC tag.
The tasks allowing you to automate your phone are under the \"Tasks\" tab and are categorised.
Here are a few examples of the available actions:
- activate/deactivate/toggle WiFi, Bluetooth, car mode
- configure a sound profile: silent/vibrate/normal
- change brightness
- set volumes levels (media, alarm, notification, ring volume)
- set a timer
- launch an app
- open an URL/URI
- send a text message or make a call
- read aloud a text with text to speech
- configure a WiFi network
- and much much more!
NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 212, 213, 215, 216
- Topaz 512 (BCM512)
- Ultralight, Ultralight C
- MIFARE Classic 1k, 4k
- FeliCa
If you have any problem please feel free to contact me.
Notes:
- NFC compatible device needed
- App permissions are limited to the use of the NFC
- In order to execute tasks, you need the free app: NFC Tasks

NFC Tools is an app which allows you to read, write and program tasks on your NFC tags and other RFID compatible chips.
All you need to do is get your device close to an NFC chip to read the data on it or execute tasks.
Simple and intuitive, NFC Tools can record standard information on your tags which will be compatible with any NFC device.
For instance, you can store a VCARD to share your contact details easily, open an URL, share a phone number or even a geolocation.
But the NFC Tools app goes further and allows you to program tasks on your NFC tags in order to automate actions that were once boringly repetitive.
Turn on the Bluetooth, set an alarm, control the volume, share a WiFi network configuration and so much more.
For example, a simple motion with your phone in front of your NFC tag before going to sleep and the WiFi will turn off, the phone will switch to silence and your alarm will be set for the next morning, all by itself.
Quite practical, isn't it?
For the most tech-savvy of you, the geeks :) preset variables, conditions and root tasks are also available so you can create more complex actions.
Make your life easier with more than 100 tasks available and infinite combinations.
The "Read" tab allows you to see data such as:
- the maker of the tag
- the type of tag (ex : Mifare Ultralight, NTAG213)
- the norm of the tag (ex : NFC Forum Type 2)
- the available technology (ex: NFC A)
- its serial number (ex : 04:85:c8:5a:40:2b:80)
- the size of the tag and of the data on it
- if you can write on the tag and if the tag can be locked as read only
- all the data on the tag (NDEF format)
The "Write" tab let you record standardised data such as:
- a simple text
- a link to a website, a video, a social profile or an app
- an email
- a contact
- a phone number
- a predefined text message
- an address or geolocation
- a WiFi or Bluetooth configuration
- personalised data.
The write function allows you to add as much data as you wish.
This way you can record large quantities of information on your tag.
Other features are available under the "Other" tab,
such as copying, erasing and password protecting your NFC tag.
The tasks allowing you to automate your phone are under the "Tasks" tab and are categorised.
Here are a few examples of the available actions:
- activate/deactivate/toggle WiFi, Bluetooth, car mode
- configure a sound profile: silent/vibrate/normal
- change brightness
- set volumes levels (media, alarm, notification, ring volume)
- set a timer
- launch an app
- open an URL/URI
- send a text message or make a call
- read aloud a text with text to speech
- configure a WiFi network
- and much much more!
NFC Tools has been tested with the following NFC tags:
- NTAG 203, 210, 212, 213, 215, 216
- Topaz 512 (BCM512)
- Ultralight, Ultralight C
- MIFARE Classic 1k, 4k
- FeliCa
If you have any problem please feel free to contact me.
Notes:
- NFC compatible device needed
- App permissions are limited to the use of the NFC
- In order to execute tasks, you need the free app: NFC Tasks